How do I enable my Haiku products’ Sleep settings?
Last updated: May 3, 2018
Sleep Mode lets you choose unique fan settings for personalized nighttime comfort. When Sleep Mode is on, all other features are disabled—nothing should disturb your sleep, including your ceiling fan.
When you enable Sleep Mode, all schedules, modes, and the motion sensor will be disabled, and the fan light will turn off. If you use the app, remote, or Haiku Wall Control to turn the light back on during the night, Sleep Mode will be disabled.
Adjusting Sleep Mode Settings
In the Haiku Home app, tap a room on the Home screen, and then tap .
Tap Sleep Settings.
Select your ideal sleeping temperature.
This is the temperature the fan will attempt to simulate while you sleep. The fan will analyze ambient temperature and humidity, and it will adjust its speed to keep you comfortable throughout the night.
Set the Min Speed and MaxSpeed to your desired minimum and maximum fan speeds.
When the fan is in Sleep Mode, it will run at your selected minimum speed whenever the room temperature is at or below your ideal sleeping temperature. The fan will not run above your selected maximum speed when it is in Sleep Mode.
Tap the back button, and then tap Wake Up Settings.
Toggle Light to enable it if you want the light to turn on when you disable Sleep Mode. Drag the slider to the desired light brightness.
Tap the back button, and then tap Done.
Using Sleep Mode
In the Haiku Home app, tap a room on the Home screen, and then tap.
When you are ready to fall asleep, toggle Sleep Mode to enable it.
You can also press the Sleep button on the remote. The fan will adjust to achieve your ideal comfort level throughout the night.
When you wake up, toggle Sleep Mode to disable it.
You can also press the Sleep button on the remote. The fan will resume the speed it was at before you went to sleep, and the light will turn on, if enabled.